Page 17 - Beaumont Basin Watermaster
P. 17
Beaumont Basin Watermaster Memorandum No. 16-02 Page 2 of 8
Noble Creek Observation Well 4S – A 15 feet declined has been recorded at this
well since the end of May 2015 as depicted in Figure 4.
Summit Cemetery – The water level at this well is highly influenced by the
intermittent operations of a nearby local production well as observed in Figure 5.
A general uptrend in water levels continues at this well as it has gained 15 feet
since early July 2015.
Troubleshooting Issues
The following malfunctioning issues were encountered during our January 25, 2016 field
visit:
BCVWD Well No. 2 – The communications cable at this well is not working properly
and needs to be replaced. A new 600 ft cable will be installed after the Board
meeting concludes. Probe continues to collect hourly data. Communications
cable will be sent back to Solinst for inspection and fixing.
Banning Well M-9 – Barometer is not working properly as it has not recorded any
information since January 12, 2016. Probe will be sent back to Solinst for
inspection.
YVWD Well No. 34 – Communications cable has been changed with a new cable
as the existing cable was not working properly. This is an old cable and it is out of
warranty.
Leveloader – This device is used to download the data from monitoring probes
through the communications cable. The device is not working properly when
transferring information into the computer for processing. Leveloader will be sent
to Solinst for inspection and fixing.
Noble Creek Observation Well 4S – A 15 feet declined has been recorded at this
well since the end of May 2015 as depicted in Figure 4.
Summit Cemetery – The water level at this well is highly influenced by the
intermittent operations of a nearby local production well as observed in Figure 5.
A general uptrend in water levels continues at this well as it has gained 15 feet
since early July 2015.
Troubleshooting Issues
The following malfunctioning issues were encountered during our January 25, 2016 field
visit:
BCVWD Well No. 2 – The communications cable at this well is not working properly
and needs to be replaced. A new 600 ft cable will be installed after the Board
meeting concludes. Probe continues to collect hourly data. Communications
cable will be sent back to Solinst for inspection and fixing.
Banning Well M-9 – Barometer is not working properly as it has not recorded any
information since January 12, 2016. Probe will be sent back to Solinst for
inspection.
YVWD Well No. 34 – Communications cable has been changed with a new cable
as the existing cable was not working properly. This is an old cable and it is out of
warranty.
Leveloader – This device is used to download the data from monitoring probes
through the communications cable. The device is not working properly when
transferring information into the computer for processing. Leveloader will be sent
to Solinst for inspection and fixing.
